WHAT TO DO IF YOUR WATER HEATER UNEXPECTEDLY STOPS WORKING

What To Do If Your Water Heater Unexpectedly Stops Working

What To Do If Your Water Heater Unexpectedly Stops Working

Blog Article

Website

What're your opinions about What Would Cause My Electric Water Heater to Stop Working??


How to Troubleshoot and Repair an Electric Water Heater
Many modern-day residences make use of an electrical hot water heater for their heating unit, as a result of its benefit and convenience of use. Nevertheless, just like any other electrical appliances, troubles might occur with its usage, all of a sudden. It can be truly aggravating to wake up to a cool shower rather than a hot one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the situation might be, water heater troubles can be rather nerve-racking. Luckily, we've made a checklist of feasible options to your hot water heater problems. There are a number of variables that might cause most of these issues, maybe a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you turn off the major power supply for security. Whatever the trouble is, getting it repaired need to not position way too much of a problem if you adhere to these steps:

Examine Your Power Supply:


As basic as this might seem, it is really necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, merely turn it on and off again. Replace any kind of broken or damaged fuse. Test the appliance with power after these adjustments to see if it's now functioning.

Examine the Heating Element in the Hot Water Heater:


If it's not a power problem, then attempt checking out your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any one of them is damaged, change that part and after that examine whether the hot water is back on.

Inspect Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to inspect the temperature level setups on your upper thermostat. Guarantee the breaker is turned off before doing anything. Open the gain access to panel and also press the red button for temperature reset above the thermostat. This must aid heat the water. Turn the circuit breaker back on and also examine if the problem has been fixed.

Call A Specialist:


If after changing all faulty parts as well as resetting your temperature, the hot water heater still isn't functioning, you might require to contact an expert plumber for an expert viewpoint. The issue with your heating system could be that the cold and hot faucets have actually been switched or it may be undersized for the amount of hot water needed in your home. Whatever the situation may be, an expert plumber would certainly assist fix the trouble.

Verdict


Hot water heater troubles are not constantly significant. Many of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the faulty components should do the trick. Nonetheless, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it dealt with.

What Would Cause My Electric Water Heater to Stop Working?


Your water heater is one of the most forgotten-about appliances in your home—until it quits working. Once you realize that there’s no hot water, the water heater jumps up to become the most noticeable appliance you have. No one in your family will be happy until you get the water heater fixed.



To fix an electric water heater as soon as possible, follow the troubleshooting advice discussed below.


Basic Water Heater Troubleshooting


Fortunately, you may be restore the hot water supply simply by resetting the house circuit breaker for the water heater. A tripped circuit breaker is one of the top causes of water heater failures. Shut the hot water heater breaker off then turn it back on. Give the water heater a half hour to heat up (if it’s working) and then check for hot water through one of your faucets.



If you get hot water after resetting the breaker, then the problem may be fixed if the breaker inadvertently tripped and it doesn’t continue tripping.



If the water heater breaker trips again, then you’ll likely need to have a service technician examine and repair the water heater. The service technician will check the circuit breaker and electrical supply wiring for the water heater. A short in the supply wiring or a bad circuit breaker could be causing the breaker to trip. An internal failure such as a broken heating element can also cause the breaker to continue tripping.



When resetting the water heater circuit breaker doesn’t work at all, then the water heater may be getting power while an internal water heater failure is causing the problem.


Conduct Advanced DIY Water Heater Troubleshooting


If the water heater doesn’t work after resetting the high-temperature limit switch, then you’ll need to either conduct some advanced water heater troubleshooting or have a service technician diagnose and repair the water heater failure.



Sears Technicians created a safe and highly-successful DIY advanced troubleshooting video to help you determine the cause of a water heating failure if you want to try to fix the problem yourself. Follow the advice in this video to find and fix the cause of the heating failure on your own:


The video begins with the basic troubleshooting described in the first 2 sections described above. It then goes on to guide you through checking water heater components to safely find the cause of the water heating failure.



If you get to a point in the troubleshooting where you’re not completely confident that you can safely continue, schedule a service technician to diagnose and repair the water heater.



The DIY water heater troubleshooting shown in the above video differs from the diagnosis techniques that service technicians typically use when examining a water heater to find the cause of a heating failure. Safe DIY troubleshooting doesn’t rely on live voltage checks while service technicians often use live voltage checks to quickly find the cause of water heater failures.



While many DIY’ers have been able to find the cause of water heater failures using troubleshooting advice shown in the video, some failures such as a bad circuit breaker can only be found using live voltage checks which should only be conducted by a trained service technician.



Sears Technicians have the training, tools and expertise to quickly find the cause of a water heater failure. Rely on our technicians to diagnose and repair your water heater or any other appliance in your home that quits working.



While the technician is in your home, take advantage of appliance Cleaning & Maintenance offers that the tech discusses with you. Keeping your appliances well-maintained will help them work more efficiently and last longer. Regular professional maintenance will also help prevent costly breakdowns of the appliances you depend on every day.

https://www.searshomeservices.com/blog/what-would-cause-my-electric-water-heater-to-stop-working


What Would Cause My Electric Water Heater to Stop Working?

We hope you enjoyed reading our article on How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for spending some time to read our content. Are you aware of anybody else who is inquisitive about the topic? Feel free to promote it. We recognize the value of reading our article about What Would Cause My Electric Water Heater to Stop Working?.




Schedule Today

Report this page